|
|
| Bar
Style System
|
Assembled handlebars/control
systems feature concealed reservoirs, wires, cables, and hoses while
maintaining standard functions at your fingertips. Choose from
several different styles of 1-1/4" bars and grips.
~ Everything you need in one
complete package ~
Systems available for hydraulic
or mechanical clutch applications. Clean, reliable, and built to the
highest standards with the kind of pride only found in the USA.
The system is shipped
pre-wired, plumbed, and ready to bolt on your triple tree. All you
have to do is the bottom end, bleed the brake, clutch and hook up the
throttle cables.
|
|
Bike Lifts
|
EazyRizer Lift is suitable for ALL Bikes, just choose the inter-changeable
mounting brackets to suit your type of bike or the task in hand.
For SuperBikes and Retros you have the option of using Wheel Mounting brackets
to support the bike by it's wheels, or you can opt for the Multi-Mount brackets
- which cradle the front and rear chassis and enable full wheel/suspension
removal.
For Harley Davidson, Customs, Classics, Trials, Quads, ATVs and all bikes with
duplex (twin chassis) frames, the Beam Mounting option is used, which again
allows full access and wheel/suspension removal.
Very Important:
Some actions involved in lifting a bike are common to all of the above lifting
options, so please study the following data in it's entirety, regardless of the
type of bike under review. Equally many of the safety issues apply when lifting
any type of bike, so you will find the information throughout the whole of this
page invaluable.
|
|
Cylinder
Heads
|
Brand New! 1340
CYLINDER HEADS SCREAMIN' Built right at the
factory for unparalleled quality. The re-designed combustion
chamber, optimized for flow and efficiency, works with stock or
Hi-Compression Forged Piston Kits. Heads come up with larger than
stock 1.898" intake valves and 1.623" exhaust valves.
Valve Spring Kit P/N 18223-98 is used and can accommodate .520"
valve lift. At 72cc, this equates to a 9.5:1 compression ratio
with stock pistons. Use of Screamin' Eagle Spark Plugs P/N
32320-91 when flat-top pistons are used or P/N 32321-91 with high
compression pistons is recommended. 50-state legal for '93-'99
models when used with Original Equipment pistons, air cleaner, cam,
exhaust, and ignition. '84-'92 models require Threaded Cylinder
Head Inserts P/N 29304-92. Fits '84-later carbureted Evolution
1340-equipped models. May also be used on '84-later EFI Evolution
1340-equipped models in conjunction with an approved ECM
calibration.
See your dealer for details.
|
|
Kits
|
Kits includes: threaded
inserts, chrome nuts, chrome washers, polyurethane bushings and
7/8" OD hollow riser bolts for internal lines
Fits: 1 1/4"
handlebars with a .090 wall
|
|
|
|
Departments
